- Contact Person : Mr. lee Rock
- Company Name : Guangzhou Tiant Machinery Co., Ltd.
- Tel : 0086-20-3202 2922
- Fax : 0086-20-3202 2921
- Address : Guangdong,guangzhou,501-503 Room No. , 232# Kezhu Road , Science Town, guangzhou
- Country/Region : China
- Zip : 510 660
injection plastic machine
Related Product Searches:injection plastic machine,High Quality,injection plastic machine, injection molding machines
injection plastic machine
Machine Features
1. Linear construction transports preform to heating and bottle forming.
2. Upgrade production capacity.
3. Upgrade power efficiency.
4. Simplified operation by MMI control panel.
5. Modular design facilitates maintenance.
6. Less energy consumption and the heating temperature of each section of the
perform tube can easily be adjusted when needed.
7. With better design as rotary blowing machine
8 Capacity up to 16000bph.
injection machine
Model | TP-72IVPET | TP-96IVPET | |||
Injection Unit | Screw L/D ratio | L/D | 25 | 25 | 25 |
Screw Diameter | mm | 120 | 120 | 140 | |
Injection Pressure | Kgf/cm² | 907 | 907 | 995 | |
Machine size (L*W*H) | Mm | 10800×4380×2600 | 11800×4480×2600 | 13800×4600×2600 | |
Shot Volume (Max.) | cm³ | 3800 | 3800 | 5086 | |
Shot Weight | g | 4559 | 4559 | 6103 | |
ors | 161 | 161 | 215 | ||
Clamping Unit | Clamping Force | Ton | 450 | 500 | 500 |
Clamping Stroke | Mm | 500 | 730 | 730 | |
Mold Thickness (min/max) | Mm | 400~820 | 450~970 | 450~970 | |
Tiebar Spacing (W*H) | Mm | 780×780 | 920×1020 | 920×1020 | |
Ejector Storke | Mm | 200 | 200 | 200 | |
Ejector Force | Ton | 15 | 18 | 18 | |
No.of Ejector Pins | Piece | 11 | 11 | 11 | |
System Pressure (max) | Kg/cm² | 140 | 140 | 140 | |
Preform Mold | Caviation (max.) | Piece | 72 | 96 | 96 |
Preform Length (max.) | Mm | 200 | 200 | 200 | |
Hot-runner | Pneumatic Valve-gate Hot Runner Mold | ||||
Robot | T/O Tubes | Piece | 216 | 288 | 288 |
Installation Power | Pump Motor Power | KW | 55+90 | 55+90 | 75+110 |
Robot Power | KW | 25 | 42 | 42 | |
Mold Heating | KW | 47 | 47 | 72 | |
Machine Heating | KW | 87.43 | 87.43 | 125 | |
Total Power | KW | 304 | 321 | 424 | |
General Requirements | AC Power(3 Phase 4 Line) | V | 380 | 380 | 380 |
°C | 5~15 | 5~15 | 5~15 | ||
Chilling Water | Mpa | 0.8 | 0.8 | 0.8 | |
L/min | 900 | 1200 | 1200 | ||
°C | below25 | below25 | below25 | ||
Cooling Water | Mpa | 0.3 | 0.3 | 0.3 | |
L/min | 300 | 400 | 400 | ||
Notes: A: Recommended chilling water temperature is 5-15°C B: The data are subject to change for contineous improvement in technology | |||||
preform injection machine
injection plastic machine
